Axel Joost Elektronik Pol Changer

Tuotenumero 749559

66,89 € · varastossa

Some bikes switch the outputs for the direction indicators to minus, when active. This makes a change of the original indicators to aftermarket indicators a bit tricky. This polarity changer is the solution for it. It converts the ground switched signal from the bcm module or flasher relay to a positive supply voltage for the indicators. The module contains 2 separate channels. The maximum load is 60 Watt per side. With the green "Mode" cable you can decide if the outputs are switched on or off for 0,5 seconds when the module powers on. This prevents the outputs from wrong signals when powered on if a connected control box needs some time to power up.